Advanced search

47 search results

Page 1 out of 5 Pages

  • RIFF JTAG Error codes and troubleshooting: Error code 0x82
    Answer: 1.2. Error code 0x82 Returned by routines which expect a different input parameter. Most often is returned by the h/w scripts (*.has) processing block in case ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x81
    Answer: 1.1 Error code 0x81 Is returned by many routines which were accessing UART (for read or write) and UART port was unexpectedly closed by the Host ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x83
    Answer: 1.3. Error code 0x83 Returned by firmware in case there was an attempt to use some specific function like read/write target memory by 8- 16- 32- ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x60
    Answer: 1.5. Error code 0x60 Returned by the JTAG shifter block when timeout happens. This is possible when RTCK mode is active and firmware waits for RTCK ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x43
    Answer: 1.8. Error code 0x43 Returned by the box’s firmware when target HALT operation was performed on already halted target.   Solution: Don't halt already halted target !  ...

  • RIFF JTAG Error codes and troubleshooting: ERROR: Wrong response code from the RIFF Box: 0x44
    Answer: 1.9. Error code 0x44 Returned by the box’s firmware if attempted target HALT operation failed.   Solution: Check target device connection. In case You're trying to access device based ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x45
    Answer: 1.10. Error code 0x45 Returned by box’s firmware when attempt to read ARM9 ICE Breaker register failed. This happens when target unexpectedly loses power or connection ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x46
    Answer: 1.11. Error code 0x46 Returned by box’s firmware when attempt to write ARM9 ICE Breaker register failed. See error code 0x45 for symptoms. ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x47
    Answer: 1.12. Error code 0x47 Returned by box’s firmware as status whether target is currently running or halted. Current code means target is running. ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x48
    Answer: 1.13. Error code 0x48 Returned by box’s firmware when attempt to start target running (to exit from debug/halted state) failed. Could happen when user clicks Run ...

1  2  3  4  5  next  >>