Advanced search

51 search results

Page 1 out of 6 Pages

  • RIFF JTAG Box setup: How to set up RIFF Box
    Answer: System Requirements: Windows XP, Windows Vista or Windows 7 based PC (Windows 8 is also tested) Display resolution 1280x1024 or more At least 4GB free space for RIFF ...

  • Useful Plugins: How to use RIFF Box eMMC EFI/PIT/MBR/EBR Partitioning plugin
    Answer: This plugin works with eMMC image files and phones which have following formatting:1.    Image Files or Phones with Standard Master Boot Record (MBR) and Extended ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x81
    Answer: 1.1 Error code 0x81 Is returned by many routines which were accessing UART (for read or write) and UART port was unexpectedly closed by the Host ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x82
    Answer: 1.2. Error code 0x82 Returned by routines which expect a different input parameter. Most often is returned by the h/w scripts (*.has) processing block in case ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x83
    Answer: 1.3. Error code 0x83 Returned by firmware in case there was an attempt to use some specific function like read/write target memory by 8- 16- 32- ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x60
    Answer: 1.5. Error code 0x60 Returned by the JTAG shifter block when timeout happens. This is possible when RTCK mode is active and firmware waits for RTCK ...

  • RIFF JTAG Error codes and troubleshooting: ERROR(0x42): Communication is not established. Terminating.
    Answer: 1.7. Error code 0x42 Returned by the box’s firmware in case there was nothing detected on the JTAG chain.    Solution: Hold power key on target device during connection ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x43
    Answer: 1.8. Error code 0x43 Returned by the box’s firmware when target HALT operation was performed on already halted target.   Solution: Don't halt already halted target !  ...

  • RIFF JTAG Error codes and troubleshooting: ERROR: Wrong response code from the RIFF Box: 0x44
    Answer: 1.9. Error code 0x44 Returned by the box’s firmware if attempted target HALT operation failed.   Solution: Check target device connection. In case You're trying to access device based ...

  • RIFF JTAG Error codes and troubleshooting: Error code 0x45
    Answer: 1.10. Error code 0x45 Returned by box’s firmware when attempt to read ARM9 ICE Breaker register failed. This happens when target unexpectedly loses power or connection ...

1  2  3  4  5  6  next  >>