Advanced search
45 search results
Page 1 out of 5 Pages
- RIFF JTAG Error codes and troubleshooting: ERROR: Failed to unpack received data. Terminating. Answer: Returned by JTAG Manager in case when it's impossible to decrypt received data from DCC loader.Restarting JTAG Manager usually helps, otherwise it's caused by hardware ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x81 Answer: 1.1 Error code 0x81 Is returned by many routines which were accessing UART (for read or write) and UART port was unexpectedly closed by the Host ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x82 Answer: 1.2. Error code 0x82 Returned by routines which expect a different input parameter. Most often is returned by the h/w scripts (*.has) processing block in case ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x83 Answer: 1.3. Error code 0x83 Returned by firmware in case there was an attempt to use some specific function like read/write target memory by 8- 16- 32- ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x60 Answer: 1.5. Error code 0x60 Returned by the JTAG shifter block when timeout happens. This is possible when RTCK mode is active and firmware waits for RTCK ...
- RIFF JTAG Error codes and troubleshooting: ERROR(0x42): Communication is not established. Terminating. Answer: 1.7. Error code 0x42 Returned by the box’s firmware in case there was nothing detected on the JTAG chain. Solution: Hold power key on target device during connection ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x43 Answer: 1.8. Error code 0x43 Returned by the box’s firmware when target HALT operation was performed on already halted target. Solution: Don't halt already halted target ! ...
- RIFF JTAG Error codes and troubleshooting: ERROR: Wrong response code from the RIFF Box: 0x44 Answer: 1.9. Error code 0x44 Returned by the box’s firmware if attempted target HALT operation failed. Solution: Check target device connection. In case You're trying to access device based ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x45 Answer: 1.10. Error code 0x45 Returned by box’s firmware when attempt to read ARM9 ICE Breaker register failed. This happens when target unexpectedly loses power or connection ...
- RIFF JTAG Error codes and troubleshooting: Error code 0x46 Answer: 1.11. Error code 0x46 Returned by box’s firmware when attempt to write ARM9 ICE Breaker register failed. See error code 0x45 for symptoms. ...