Advanced search

Popular Search Words

52 search results

Page 1 out of 6 Pages

  • RIFF JTAG Box setup: How to set up RIFF Box
    Answer: System Requirements: Windows XP, Windows Vista or Windows 7 based PC (Windows 8 is also tested) Display resolution 1280x1024 or more At least 4GB free space for RIFF ...
  • Useful Plugins: How to use RIFF Box eMMC EFI/PIT/MBR/EBR Partitioning plugin
    Answer: This plugin works with eMMC image files and phones which have following formatting:1.    Image Files or Phones with Standard Master Boot Record (MBR) and Extended ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x81
    Answer: 1.1 Error code 0x81 Is returned by many routines which were accessing UART (for read or write) and UART port was unexpectedly closed by the Host ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x82
    Answer: 1.2. Error code 0x82 Returned by routines which expect a different input parameter. Most often is returned by the h/w scripts (*.has) processing block in case ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x83
    Answer: 1.3. Error code 0x83 Returned by firmware in case there was an attempt to use some specific function like read/write target memory by 8- 16- 32- ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x60
    Answer: 1.5. Error code 0x60 Returned by the JTAG shifter block when timeout happens. This is possible when RTCK mode is active and firmware waits for RTCK ...
  • RIFF JTAG Error codes and troubleshooting: ERROR(0x42): Communication is not established. Terminating.
    Answer: 1.7. Error code 0x42 Returned by the box’s firmware in case there was nothing detected on the JTAG chain.    Solution: Hold power key on target device during connection ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x43
    Answer: 1.8. Error code 0x43 Returned by the box’s firmware when target HALT operation was performed on already halted target.   Solution: Don't halt already halted target !  ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: Wrong response code from the RIFF Box: 0x44
    Answer: 1.9. Error code 0x44 Returned by the box’s firmware if attempted target HALT operation failed.   Solution: Check target device connection. In case You're trying to access device based ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x45
    Answer: 1.10. Error code 0x45 Returned by box’s firmware when attempt to read ARM9 ICE Breaker register failed. This happens when target unexpectedly loses power or connection ...

The most popular searches are: