Advanced search

56 search results

Page 2 out of 6 Pages

  • RIFF JTAG Error codes and troubleshooting: Error code 0x46
    Answer: 1.11. Error code 0x46 Returned by box’s firmware when attempt to write ARM9 ICE Breaker register failed. See error code 0x45 for symptoms. ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x47
    Answer: 1.12. Error code 0x47 Returned by box’s firmware as status whether target is currently running or halted. Current code means target is running. ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x48
    Answer: 1.13. Error code 0x48 Returned by box’s firmware when attempt to start target running (to exit from debug/halted state) failed. Could happen when user clicks Run ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x49
    Answer: 1.14 Error code 0x49 Returned by box’s firmware when some timeout happens during JTAG communication between box and target. Can happen due to erroneous connection, spontaneous ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x53
    Answer: 1.15. Error code 0x53 Returned by box’s firmware in case of attempt to set instruction breakpoint on currently selected target while all h/w breakpoint slots are ...
  • RIFF JTAG Error codes and troubleshooting: Error codes 0x54, 0x55
    Answer: 1.16. Error codes 0x54, 0x55 May be returned by box during firmware update stage. These errors are severe and can happen due to box’s h/w malfunction ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: DCC Loader has reported Error Code = 0x22
    Answer: 2.1. Error code 0x22 Returned by the DCC Loader in case received packet of data failed to pass CRC32 checksum check. May happen due to spontaneous ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x23
    Answer: 2.2. Error code 0x23 Returned by the DCC Loader when supplied parameter to requested command is wrong – for example during read operation supplied read length ...
  • RIFF JTAG Error codes and troubleshooting: WARNING: Erasing Error (0x24)
    Answer: 2.4. Error code 0x24 Returned by the DCC Loader when it fails to erase flash memory’s logical block. This is not an abnormal situation for NAND ...
  • RIFF JTAG Error codes and troubleshooting: Error code 0x2D
    Answer: 2.5. Error code 0x2D Returned by the DCC Loader when it fails to erase or program flash memory due to active write protection. Shall not happen ...

The most popular searches are: