RIFF JTAG Error codes and troubleshooting: Error code 0x2B Answer: 2.7. Error code 0x2B
Returned by the DCC Loader when it attempted to erase block of flash memory and fails waiting for selected flash memory controller ...
RIFF JTAG Error codes and troubleshooting: Error code 0x27 Answer: 2.7. Error code 0x27
Returned by the DCC Loader when it fails waiting for selected flash memory controller to assert ready status.
Explanation:
May happen if target is ...
RIFF JTAG Error codes and troubleshooting: ERROR: Read Failed with Error Code: 0x28 Answer: 2.7. Error code 0x28
Returned by the DCC Loader when it fails reading part of flash memory.
Explanation:
May happen if target is currently in some unrecoverable h/w ...
RIFF JTAG Error codes and troubleshooting: Error code 0x39 (0x3901) Answer: 2.7. Error code 0x39
Returned by the DCC Loader when it was executing an extended command and that command failed. Extended command’s failure status is operation ...
RIFF JTAG Error codes and troubleshooting: Error code 0x3C Answer: 2.7. Error code 0x3C
Returned by the DCC Loader when it detects in some targets an active write protection – thus erase/program operations will not be ...
RIFF JTAG Error codes and troubleshooting: Error code 0x3D Answer: 2.7. Error code 0x3D
Returned by the DCC Loader in case its internal memory buffer cannot satisfy current needs.
Explanation:
Can happen when DCC Loader has limited amount ...
RIFF JTAG Error codes and troubleshooting: ERROR(0x42): Communication is not established. Terminating. Answer: 1.7. Error code 0x42
Returned by the box’s firmware in case there was nothing detected on the JTAG chain.
Solution:
Hold power key on target device during connection ...
RIFF JTAG Error codes and troubleshooting: WARNING: Erasing Error (0x24) Answer: 2.4. Error code 0x24
Returned by the DCC Loader when it fails to erase flash memory’s logical block. This is not an abnormal situation for NAND ...
RIFF JTAG Error codes and troubleshooting: WARNING: Programming Error (0x25) Answer: 2.7. Error code 0x25
Returned by the DCC Loader when it fails to program part of flash memory. This is not an abnormal situation for NAND ...
