Advanced search

Popular Search Words

56 search results

Page 5 out of 6 Pages

  • RIFF JTAG Error codes and troubleshooting: ERROR: RAM memory selftest failed.
    Answer: ERROR: RAM memory selftest failed.   This error can be caused by numerous reasons. In most cases, it's due to bad connection (unstable NRST signal line), or ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF 0x010000)
    Answer: ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)  This is returned by DCC loader in case that eMMC internal controller fails to ...
  • RIFF JTAG Error codes and troubleshooting: Detected dead body ID: 0x000000E1 - WRONG!!!
    Answer: Detected dead body ID: 0x000000E1 - WRONG!!!   This error is returned by JTAG Manager, and can be caused by bad connection and low device power. Solution is ...
  • RIFF JTAG Error codes and troubleshooting: WARNING: DCC Loader was unable to initialize FLASH1 chip.
    Answer: WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000000   This error is returned by DCC loader in case that memory chip is not ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: Timeout while waiting for DCC Loader response.
    Answer: ERROR: Timeout while waiting for DCC Loader response.   Returned by DCC loader, usually during write operations. There is number of reasons which can cause this error:  RTCK/TCK ...
  • DCC Read/Write TAB: JTAG Manager - DCC Read/Write TAB
    Answer: This manual describes RIFF JTAG Manager - DCC Read/Write TAB, devided into sections:  DCC Read/Write TAB Functions and buttons description How to read full flash from target ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: Failed due to multiple communication errors.
    Answer: ERROR: Failed due to multiple communication errors.  This error is returned in case that connection between box and target device is unstable. - Badly connected/soldered - Bad ribbon ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: DCC Loader has reported Error Code = 0x35
    Answer: This is returned by DCC loader in case that eMMC internal controller fails to write specific block. Usually it means that eMMC chip has failed, ...
  • RIFF JTAG Error codes and troubleshooting: ERROR: Failed to unpack received data. Terminating.
    Answer: Returned by JTAG Manager in case when it's impossible to decrypt received data from DCC loader.Restarting JTAG Manager usually helps, otherwise it's caused by hardware ...
  • RIFF JTAG Box setup: How to register RIFF Box and Update Firmware
    Answer: Hello dear RIFF Box users !Here You can read important instructions related to RIFF Update server, RIFF Box registration and troubleshooting.First few very important warnings: Make ...

The most popular searches are: