RIFF JTAG Error codes and troubleshooting: Error code 0x3C Answer: 2.7. Error code 0x3C
Returned by the DCC Loader when it detects in some targets an active write protection – thus erase/program operations will not be ...
RIFF JTAG Error codes and troubleshooting: Error code 0x3D Answer: 2.7. Error code 0x3D
Returned by the DCC Loader in case its internal memory buffer cannot satisfy current needs.
Explanation:
Can happen when DCC Loader has limited amount ...
RIFF JTAG Error codes and troubleshooting: Unrecognized memory chip with ID = 0xAAAA/0xAAAA. Answer: 1. Unrecognized memory chip with ID = 0xAAAA/0xAAAA.
The DCC Loader upon startup always performs flash memory initialization and responds to host with valid memory ID, ...
RIFF JTAG Error codes and troubleshooting: Error: Wrong DCC Data Checksum Answer: 2. Wrong DCC Data Checksum
Happens when DCC Loader which is being executed by target is too slow to respond through the DCC channel. Since RIFF ...
RIFF JTAG Error codes and troubleshooting: ERROR: Read/Write memory failed during H/W Init Answer: ERROR: Read/Write memory failed during H/W Init
This error can happen due to few reasons:
NRST or GND pins not connected properly
Wrong model selected
Hardware failure
Solution:
Connect NRST and ...
RIFF JTAG Error codes and troubleshooting: ERROR: Set I/O Voltage failed. Real reading is "value" Answer: ERROR: Set I/O Voltage to"value" failed. Real reading is "value".
Can happen due to following reasons:
Connection with device is wrong
Target device has developed hardware malfunction
RIFF Box ...
RIFF JTAG Error codes and troubleshooting: ERROR: No response from the RIFF Box. Answer: ERROR: No response from the RIFF Box.
Can happen due to numerous of reasons. Mostly it's caused by wrongly configured RTCK/TCK sampling value, or badly connected ...
RIFF JTAG Error codes and troubleshooting: ERROR: The RTCK Signal does not respond. Answer: ERROR: The RTCK Signal does not respond.
Can happen due to numerous of reasons:
RTCK not connected
RTCK signal doesn't exist for current target device
Target device is wrongly ...
RIFF JTAG Error codes and troubleshooting: Failed to receive answer to READ command. Answer: Failed to receive answer to READ command.
This error happens mostly due to high RTCK/TCK sampling rate. If You're using "Sample at Max" RTCK settings, set ...